Table of Contents
Advertisement
16. Detach the power backplane from the PDB.
Replacing the PDB
CAUTION: Before replacing a DIMM, expansion card, or other similar PCA components due to a perceived hardware
error, make sure first that the component is firmly seated in the slot. Do not bend or flex circuit boards when
reseating components.
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
•
T-10 Torx screwdriver
•
T-15 Torx screwdriver
Procedure
1.
Attach the power backplane to the PDB.
Removal and replacement procedures
62
Advertisement
Table of Contents
