Table of Contents
Advertisement
2. Install the following components:
a. Install all drives.
b. Install all power supplies.
c. If removed, install all server blanks.
d. Install all servers.
3. Connect all peripheral cables to the servers and chassis.
4. If removed, connect the tube set.
5. Connect each power cord to the chassis.
6. Connect each power cord to the power source.
7. Employ industry best practices in routing and managing the rear panel cables and power cords.
8. Secure the chassis to the rack:
a. Open the bezel ear latch (callout 1).
b. Tighten the bezel ear screw (callout 2).
Removal and replacement procedures
33
Advertisement
Table of Contents
