Table of Contents
Advertisement
b. Move the system interconnect post away from the server bay (callout 1).
c. Release the node signal cables from the triangular bracket (callout 2).
To replace the component, reverse the removal procedure.
Removing and replacing the energy pack
Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Procedure
1. Power down the servers.
2. Remove all power:
Removal and replacement procedures
52
Advertisement
Table of Contents
Need help?
Do you have a question about the HPE Apollo 2000 Gen10 Plus and is the answer not in the manual?