Blending Without Steaming - Philips AVENT SCF870 Manual

There is a 30 seconds timer for blending function as an overheat protection. If you
have not finished blending after 30 seconds, the appliance will switch off and beep
twice as a notification. After cooling down for 30 seconds, the appliance beeps once
and you can start blending again.
Note: If the ingredients stick to the wall of the jar, switch off the appliance and loosen
them with the spatula or add some liquid.
Note: Make sure that the blended baby food has the right consistency (e.g. no lumps)
before you serve it.
Note: If the baby food is still too solid, add some fluid (e.g. water) until the baby food is
soft and smooth.
5 When you have finished blending, simply release the control knob.
» The knob automatically returns to the off position.
6 Unplug the appliance.
7 Remove the blade unit. Be careful when you remove the blade unit as it might be
hot. Remove the blended food from the jar. If necessary, use the spatula included
with this appliance.
Make sure that the baby food is at a safe temperature for your baby.
8 Under normal conditions, no water remains in the water tank after steaming.
However, in some situations (e.g. in case of scale build-up inside the water
tank, interruption of the steaming process or unintended use), some water could
remain in the water tank. In this case, empty the water tank completely after use to
avoid bacterial growth. To descale the water tank, see chapter 'Cleaning and
maintenance'.

Blending without steaming

The appliance is intended for:
– pureeing steamed and cooked ingredients for baby food
– blending fluids and fruits for baby drinks
The appliance is not intended for chopping hard ingredients such as ice cubes and
sugar cubes.
After you have put liquids in the jar, never put the jar in the steaming position.
Note: When you blend fluids, make sure you do not fill the jar beyond the maximum
level indication on the jar.
Note: Never steam baby food after you have blended it.
- English 13 -