Blending Without Steaming - Philips AVENT SCF883 Manual

5
When you have finished blending, release the blending button.
6
Unplug the appliance.
7
Remove the blade unit. Be careful when you remove the blade unit as it might be
hot. Remove the blended food from the jar. If necessary, use the spatula included
with this appliance.

Blending without steaming

This appliance is intended for the following purposes.
- Pureeing steamed and cooked ingredients
- Blending fluids and fruits
Caution
• The appliance is not intended for cutting hard ingredients such as ice cubes and sugar
cubes or sticky ingredients like cheese.
• If you have added liquids to the jar, never put the jar in the steam position, as the
liquid will go through the sieve.
Note
• When blending ingredients with fluids, make sure you do not fill the jar past the
fill level indicated on the jar.
• Do not fill past the top edge of the plastic part of blade unit when adding ingredients.
• Never put the jar with blended food inside in the steaming position on the main unit.
• If the ingredients stick to the wall of the jar, or if the blended ingredients are still too
solid, release the blending button, remove the jar from the main unit, and loosen the
ingredients with the spatula or add some liquid (e.g. drinking water) until the blended
food has the right consistency for your baby's age. When adding liquid in the jar, do not
fill the jar past the
• Make sure that the blended baby food has the right consistency before you serve it.
For guidance on what food consistencies are appropriate for different ages, refer to
the professional weaning advice that comes with this appliance, or seek advice from a
doctor or consultant.
• Do not process large quantities of solid ingredients at the same time. Process these
ingredients in a series of small batches to get a finer texture.
MAX
fill level indicated on the jar.
- English 17 -
MAX