Before First Use; Using The Appliance; Filling The Water Tank - Philips AVENT SCF870 Manual

Before first use

1 Remove all packaging material from the appliance.
2 Clean all parts except the motor unit (see chapter 'Cleaning and maintenance').

Using the appliance

Always make sure that the lid has cooled down after steaming before you remove it
to add more ingredients for blending, if necessary. Do not exceed the maximum level
indicated on the jar.
Empty the water tank before you refill it to start a new steaming process.
Always make sure that the top edge of the green blade unit is not covered with food
when you start steaming.
This appliance is intended for steaming fresh solid ingredients and then blending them to
obtain baby food. See the recipe booklet for some examples. Normally you would first
steam the ingredients and then blend them� However, you can also use the appliance for
steaming or blending only� When you use the appliance for blending only, skip sections
'Filling the water tank' and 'Steaming' and only follow the instructions in section 'Blending'.
After blending, never steam already blended food� Never steam the same batch of
ingredients for longer than 20 minutes or more than once.
This appliance is NOT intended for:
– Defrosting food
– Steaming frozen food
– Steaming already blended food
– Steaming the same ingredients for more than 20 minutes
– Cooking rice and pasta
– Blending ingredients first and then steaming them
– Heating up fluids, e.g. soup or water
– Keeping food warm for several hours
– Reheating food

Filling the water tank

1 Fill the measuring cup with water up to the required level.
The measuring cup shows millilitres and the corresponding steaming time in minutes�
See the separate recipe booklet for the recommended quantities of the recipes�
- English 8 -