Safety Alert Symbol; Be Aware Of Signal Words; Shutdown And Storage; For Your Protection - Orthman 1TRIPR II ROW UNITS Operator's Manual

SAFETY INFORMATION

Safety Alert Symbol

!
This safety alert symbol warns of
potential hazards to personal safety and
that extra precautions must be taken.
When you see this symbol, carefully read the message(s)
that follow. Follow all recommended precautions and safe
operating practices in this manual.
Hazard control and accident prevention are dependent
upon the safety awareness and proper training of
personnel involved in the operation of this implement.

Be Aware of Signal Words

Signal words designate a degree or level of hazard
seriousness. These signal words include:
DANGER
!
DANGER indicates a hazardous situation that, if not
avoided, will result in death or serious injury. DANGER
is limited to extreme situations, typically for machine
components which for functional purposes cannot be
guarded.
WARNING
!
WARNING indicates a potentially hazardous situation
that, if not avoided, could result in death or serious
injury. WARNING includes hazards that are exposed
when safety guards are removed. WARNING may also
be used to alert against unsafe practices.
CAUTION
!
CAUTION indicates a potentially hazardous situation
that, if not avoided, may result in minor or moderate
injury. CAUTION may also be used to alert against
unsafe practices.

Shutdown and Storage

DANGER
!
Avoid crushing. Failure to follow this information will
result in death or serious injury. Make sure all personnel
are clear of the implement before lowering.
Lower the implement to the ground, place the tractor in
park, turn off the engine, and remove the key.
DANGER
!
Avoid crushing. Failure to follow this information will
result in death or serious injury. Use bar stands and
cylinder stops to support the implement.
Store the implement on a clean, dry, and level surface.
An uneven surface could cause the implement to shift or
fall, resulting in injury or death as well as implement
damage. Securely support all implement components
that must be raised. Store the implement away from
human activity.

For Your Protection

CAUTION
!
Read and understand the entire contents of this manual
before operating or servicing the implement.
Read and understand all operator manuals for the
machinery used in conjunction with Orthman
equipment.
Carefully read all safety decals in this manual as well as
on the implement. Keep the implement clean so decals
are easily visible. Keep all safety decals in good, clean,
and legible condition. Immediately replace damaged
and/or missing decals. Replacement decals are available
from your Orthman dealer.
Learn to operate the implement and all components
properly. Do not let others operate the implement without
proper instruction. Unauthorized implement modifications
may impair function and safety. If you do not understand
any content in this manual or need assistance, contact
your Orthman dealer.
2-4
1TRIPR II Row Units OM-EN