Configuring The Actuator - Samson 5827 Mounting And Operating Instructions

Start-up and configuration
Fig. 7-2: Function switch

7.2 Configuring the actuator

The actuator is configured with the TROVIS-VIEW software (see Annex A). In this case, the
serial interface on the actuator is used to connect the actuator to the computer (see the 'De-
sign and principle of operation' section).
Î Refer to u EB 6661 for more details on configuration and operation using TROVIS-
VIEW.
7-2
Function switch (24 V version)
Function switch (85 to 264 V version)
Function switch with
switch positions:
Function switch with
switch positions:
A
A
B
B
EB 5827-2 EN