Samson 5827 Mounting And Operating Instructions page 9

Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions as
well as the specified hazard statements, warning and caution notes. Furthermore, operating
personnel must be familiar with the applicable health, safety and accident prevention regula-
tions and comply with them.
Referenced standards, directives and regulations
The Type 5827 Electric Actuator with a CE marking fulfills the requirements of the Directives
2014/30/EU and 2014/35/EU.
The Type 5827 Electric Actuator with an EAC marking fulfills the requirements of the Regula-
tions TR CU 004/2011 and TR CU 020/2011.
The 'Certificates' section contains this declaration of conformity and TR CU certificate.
The Type 5827 Electric Actuator is designed for use in low-voltage installations.
Î For wiring, maintenance and repair, observe the relevant safety regulations.
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Mounting and operating instructions of the valve on which the electric actuator is mount-
ed, e.g. for SAMSON valves:
u EB 5861 for Type 3260 Three-way Valve
u EB 5863 for Type 3226 Three-way Valve
u EB 5866 for Type 3222 Globe Valve
u EB 5868 for Type 3213 and Type 3214 Globe Valves
u EB 8111 for Type 3321 Globe Valve
u EB 8113 for Type 3323 Three-way Valve
u EB 8131 for Type 3531 Globe Valve for Heat Transfer Oil
u EB 8135 for Type 3535 Three-way Valve for Heat Transfer Oil
EB 5827-2 EN
Safety instructions and measures
1-3