Notes On Possible Property Damage - Samson 5827 Mounting And Operating Instructions

WARNING
!
Risk of personal injury through incorrect operation, use or installation as a result of
information on the actuator being illegible.
Over time, markings, labels and nameplates on the actuator may become covered with
dirt or become illegible in some other way. As a result, hazards may go unnoticed and
the necessary instructions not followed. There is a risk of personal injury.
Î Keep all relevant markings and inscriptions on the device in a constantly legible
state.
Î Immediately renew damaged, missing or incorrect nameplates or labels.

1.3 Notes on possible property damage

NOTICE
!
Risk of damage to the electric actuator due to the supply voltage exceeding the per-
missible tolerances.
The Type 5827 Electric Actuator is designed for use according to regulations for
low-voltage installations.
Î Observe the permissible tolerances of the supply voltage.
Risk of actuator damage due to excessively high tightening torques.
The connection of the Type 5827 Electric Actuator must be tightened with certain
torques. Excessive tightening torques lead to parts wearing out more quickly.
Î Observe the specified tightening torques.
Risk of damage to the electric actuator by moving the actuator stem too far.
The actuator stem of the electric actuator can be adjusted manually.
Î Move the actuator stem only as far as the bottom or top end position.
Risk of damage to the electric actuator due to overvoltage.
The serial interface of the electric actuator is not fitted with a surge protector.
Î Ensure that surge protection is provided on connecting a cable.
EB 5827-2 EN
Safety instructions and measures
1-5