Operation; Positioner; Led Blinking Pattern - Samson 5827 Mounting And Operating Instructions

8 Operation

After applying the supply voltage, the actuator is ready for use.

8.1 Positioner

The actuator stem's position directly follows the input signal.

8.2 LED blinking pattern

Explanations to the blinking pattern of the LEDs
The state of the corresponding
LED (on/off) is shown over time.
Blinking pattern of the yellow LED
− Device ON
− Stem position is relative
− Protecting against blockage
EB 5827-2 EN
Gray: LED illuminated White: LED not illuminated
On
Off
On
Off
On
Off
On
Off
Operation
Time in s
Time in s
Time in s
Time in s
8-1