Saluki CSA Series User Manual page 13

Tel: 886. 909 602 109 Email: sales@salukitec.com
www.salukitec.com
Fig. 10 Function panel popup
3. Menu
The menu panel co-operate with function panel (Fig. 10) to complete the measurement settings. Click menu items to make a
selection, or go to the next menu level.
If the menu item requires numeric input, a soft keyboard will automatically pop up for enter digits. After the input is completed,
press the "Enter" key in soft keyboard to confirm input. Example shown in Fig. 11, the soft keyboard will automatically pop up when
you select "starting freq" item. Physical keyboard input is also supported.
Fig. 11 Numerical input for menu selection
As shown in Fig. 9, The menu page has 7 cells. In a few cases, the menu item exceeds 7, the last item is "More..", click this item
to change the page.
4. Digital input
Click this area, a soft keyboard if pop up for numeric input. This is mainly used for fast setting for Markers, Traces, etc. Fig. 12
shows an example when you want to quickly set the frequency point of Marker1.
13