Table of Contents
Advertisement
Tel: 886. 909 602 109 Email: sales@salukitec.com
www.salukitec.com
Fig. 12
Digital input
5. Status information
The device's working status is displayed here, including system prompts and error messages. Please pay special attention to the
system information displayed here when you are using the CSA series signal analyzer, because errors may lead to wrong
measurement results (such as amplitude is incorrect when there's "ADC Overload" warning).
6. Back(Esc) button
Shortcut for Esc operation, use this button to quickly go back to the previous menu, or cancel the current input.
7. Windowed/full screen select
Click here to switch between full screen/window to suit different monitor sizes and resolutions. Note that at lower resolutions (eg
1366x768) full screen mode may not be displayed fully if scaling is turned on. At this point you need to switch to windowed mode.
The aspect ratio of windowed mode can be changed by dragging to fit some monitors with special aspect ratio.
14
Advertisement
Table of Contents
