Table of Contents
Advertisement
Tel: 886. 909 602 109 Email: sales@salukitec.com
www.salukitec.com
3 Software Function Description
The software operation is almost the same as the traditional desktop spectrum analyzers. The function items are shown in Fig. 9.
The functions of each item are described as follows:
Fig. 9 GUI Division
1. Real-time display area
The real-time measurement results are displayed in this area. The content is displayed differently in different measurement modes.
Note that many measurements need to be displayed in separate windows, and two cascade windows are supported at most. The
user can drag the window edges to resize the two windows. At the same time, this area also displays the parameter settings
related to the current measurement, such as trigger status, curve quantity, BW value, SWEEP time, sweeping mode
(SWEEP/FFT), local control/remote control status and other important information.
2. Function button/Function Panel
Click the function button to call up the function panel pop-up box(as shown in Fig. 10). All instrument functions and parameters
setting can be done through the function panel, such as setting frequency range, amplitude reference, cursor, change
measurement mode, change display mode, etc. Click anywhere outside the popup to hide the popup window.
12
Advertisement
Table of Contents
