Power Input; Reusable; Scanner Base And Handpiece; Calibration - Vatech EzScan-i User Manual

Hide thumbs Also See for EzScan-i:
Table of Contents

Advertisement

Installation Category
Pollution Degree
Ingress of Liquids
Protective Class
Overvoltage category
Max. working condition
Other possible accessories (IEC60601-1
3rd, Cl. 16)
Equipment Maintenance
Cleaning

2.7 Power Input

The power adapter input is 5V DC, 100-240V AC, 50-60Hz.
2.8 Reusable Tips
Scanner tip is autoclavable up to 250 times in a steam autoclave when used with
132°C/134°C 4 mins cycle or 121°C 45 min cycle.
See below: section 9.2

2.9 Scanner Base and Handpiece

The scanner body consists of the Docking Base and Handpiece, which are
connected by a flexible, non-detachable cable.

2.10 Calibration

The EzScan™ intraoral scanner is factory calibrated. In the case of calibration issues
due to transport, please contact your reseller or Vatech support technician.
Cleaning and Sterilizing
1
2
IPXO
Class IIIb
II per IEC 60664-1
Continuous cycles with image capture
and transmission from/to Notebook or
non-medical grade PC.
Notebook with AC/DC Adapter.
No user maintenance is required, and no
user service is allowed. Please contact
technical support in case of problem.
Do not try to clean the inside of the de-
vice Refer to section 9.1: Cleaning the
Handpiece for cleaning and sterilization.
Tips.
Page 13

Advertisement

Table of Contents
loading

Table of Contents