WARNING
peripherals such as antenna cables and external antennas)
should not be used within 30 cm of any part of the EzScan,
including cables specified by the MANUFACTURER. Otherwise,
performance degradation of this equipment may occur.
NOTE: During operation of the system, the handpiece and the tip
may get slightly warm; this is normal.
WARNING
ventilation opening at the bottom of the handpiece should
never be obstructed.
WARNING
equipment must be avoided as it may result in improper
operation. If this use is necessary, it is advisable that this and
the other equipment be observed to verify that they are
operating normally.
11.9
EzScan Performance
WARNING
images to the laptop/notebook with the installed image
manipulation software and the video stream is visible in the
bottom left corner of the screen. If not used properly, there
may be loss of transmission of image information or slow
transmission temporarily.
Page 90
: Portable RF communication equipment (including
: In order to prevent over-heating of the system, the
: Use of this equipment adjacent to or on other
: Under normal use, the EzScan should transmit
User Manual
Need help?
Do you have a question about the EzScan-i and is the answer not in the manual?
Questions and answers