Using Scan Tools - Vatech EzScan-i User Manual

7.13

Using Scan Tools

At each step of the scan workflow, you can use the features available in the right-
hand Scan Tools menu.
Using the Scan Trim tool
After scanning, you can use the Trim tool in the right-hand Scan Tool menu
to trim the 3D model and remove any unwanted data.
To use the Trim tool:
STEP 1.
STEP 2.
STEP 3.
STEP 4.
STEP 5.
IMPORTANT: Trimmed data cannot be recovered.
Page 54
Click on the Scan Trim icon in
Select the Scan Trim size.
Click+Hold [Ctrl] to select the
removed,
Click on the Delete icon to remove unwanted scan
areas.
Click OK to Confirm Trim Operation.
Scan Tool menu.
the
surface area to be
User Manual