Operation Controls - AGFA DX-D User Manual

10 | DX-D Software Console | Introduction to the DX-D Software Console

Operation Controls

Figure 1: Operation controls
1. DAP display frame
2. Device status frame
3. Error status frame
4. Positioning parameters
5. Collimator parameters
6. Window navigation buttons
7. Radiographic parameters
8. Focal spot indicator
9. AEC buttons
10. X-ray tube load
The graphical user interface consists of several panes and toolbars.
Topics:
0189D EN 20180329 1421
Note: The contents of the graphical user interface depends on the
configuration of the X-ray system. The screenshots in this chapter
are examples.