Table of Contents
Advertisement
Argument Details for the Default DID Service
Use Remainder.
Specifies whether a particular part,
i.e. the remainder, of the inbound number will be used
to form a part of the outbound number.
For a remainder to become non-zero a specified
inbound
Prefix
has to match the first part and/
or a specified inbound
Suffix
has to match the last
part of an inbound number, however individually or
combinations of both never fully match the complete
inbound number.
Both inbound Prefix and Suffix can be defined under
Dialplan entry
details. When
Use
Remainder, is
active the previously mentioned "remainder" will be
appended to and precede the
Prefix
and the
Suffix
of the outbound number, respectively. The outbound
Prefix
and
Suffix
precede and append, respectively,
the "remainder" as to form the complete outbound
number.
The latter prefix and suffix can be defined under
Arguments. Prefixes and suffixes are standard
parameters of dial plans.
Suppose, as an example, in the
Dialplan entry details
the inbound Prefix equals 9876 and inbound suffix
equals 54. In the
Arguments
settings the outbond
prefix equals 1234. For an inbound connection to
phone number 9876154 the Entrypoint will strip the
prefix 9876 and the suffix 54 from the called number,
hence the remainder equals 1. For the outbound
connection the Entrypoint will add the prefix (configured
in arguments) in front of the remainder, hence the
outbound number equals 12341.
For the same settings with an inbound number
9876254 results in an outbound number 12342.
In case the prefix and/or suffix fully match the
inbound number the remainder will be empty and the
useremainder value will be ignored.
Allow forwarding
must be switched off
when using the
Secretary
functionality! The
Secretary functionality will be discussed in
the examples.
Table of
Trademarks &
Patents &
Contents
Copyright
Disclaimers
D 14050.04
10.2007
DID Argument Details
Suffix.
Specifies the last part, i.e. the part
appended to the remainder, of the Outbound
number. The outbound suffix can be defined
under Arguments.
Allow forwarding.
After call setup the
call is offloaded from the Entrypoint
system, i.e. not routed via the Entrypoint
system any longer, to free resources.
Safety/
To Get You
Using the
Environmental
Up and Going
Entrypoint
Prefix.
Specifies the first part, i.e. the part
preceding the remainder, of the outbound
number. The outbound prefix can be
defined under Arguments.
Use sub number.
The sub number is a number
extension following the main number separated from
the main number by an
*
. In this way a number plan
behind a main number can be reached directly.
Viewing the
Configuring
System Status
the Entrypoint
44
No Media Sources can be added to DID
service.
Net type.
Either H.324m,
H.323
outbound call.
AV mode.
This mode determines the outbound audio
and video call settings. It is either
Video,
Auto(matic) no fallback to
to audio
and
Auto + always fallback to
•
In the
Audio Only
mode a voice call is being setup,
even when all endpoints support both audio and
video capabilities. Note that this setting will be
overruled in case
Allow Forwarding
and both endpoints possess audio and video
capabilities.
•
In the
Audio + Video
mode a call is only being setup
when endpoints support both audio and video
capabilities and a call with both these capabilities
can be set up.
•
In the
Auto
mode a call is being setup according to
the capabilities of the endpoints. Of the latter, 3
versions can be distinguished: no fallback to audio,
fallback to audio or always fallback to audio.
•
In the
no fallback to audio
case either an
video
or an audio only call is being setup, depending
on the capabilities choice of the initiating endpoint,
i.e. when an
audio + video
call is being set up,
whereas the receiving endpoint only supports audio,
the call is terminated.
•
In the
fallback to audio
case capabilities can be
changed to an audio only call when the receiving
endpoint supports only audio, even when an
video
call is being set up by the initiating endpoint.
•
The
always fallback to audio
the telephony switch interferes or cannot handle
capability renegotiation, therefore when an
+ video
call fails automatically an audio call will be
set up.
Maintenance
Dial Plan
Services
Services
& Upgrade
Examples
TANDBERG
TANDBERG
ENTRYPOINT
ENTRYPOINT
USER GUIDE
USER GUIDE
or
SIP
of the
Audio
Only,
Audio +
audio,
Auto + fallback
audio.
is set to
Yes
audio +
audio +
case is used in case
audio
Contact
Information
Advertisement
Table of Contents
