Ip Configuration - TANDBERG ENTRYPOINT Administrator's Manual

IP Configuration

Select IP from the
Configuration to access the
IP Configuration pane.
DNS Interface
Up to five Domain Name
Server IP addresses can be
specified here. Your LAN
administrator will provide
the correct values for these
fields. By default these fields
are set to 127.0.0.1
Date and Time Settings. An
NTP server address can be
specified here to provide the
Entrypoint with up-to-date
time and date information.
Save. When ready to store
the new settings, press
Save. These settings will
take effect when the system
has been restarted.
Restart. This button will
restart the Entrypoint.
Any changes made in the
IP Configuration of the
Entrypoint will take effect
after the system has been
restarted.
Table of Trademarks & Patents &
Contents Copyright Disclaimers
D 14050.04
10.2007
Safety/ To Get You Using the
Environmental Up and Going Entrypoint
Viewing the Configuring Configuring Maintenance
System Status the Entrypoint the Entrypoint
32
TANDBERG TANDBERG
IP Address Assignment is DHCP or Static:
•
DHCP: Dynamic Host Configuration Protocol
can be selected when a DHCP server
is present. Static IP Address, Static IP
Subnet Mask and Static IP Gateway are
ignored because these parameters are
assigned by the DHCP server.
•
Static: If Static assignment is used, the
Entrypoint's IP address, IP subnet mask, and
the Gateway's IP address must be specified
in the respective IP address fields.
IP Ethernet Speed provides five settings to
choose from:
•
Auto The Gateway will negotiate detect the
speed and duplex on the LAN.
•
10Half The Gateway will connect to the LAN
using 10 Mbps/Half Duplex.
•
10Full The Gateway will connect to the LAN
using 10 Mbps/Full Duplex.
•
100Half The Gateway will connect to the
LAN using 100 Mbps/Half Duplex.
•
100Full The Gateway will connect to the
LAN using 100 Mbps/Full Duplex.
IP Address. The Static IP Address defines
the network address of the Entrypoint. This
address is only used in static mode. Your LAN
administrator will provide you with the correct
address for this field.
IP Subnet Mask. The Static IP Subnet Mask defines
the type of network. Your LAN administrator will
provide the correct value for this field.
IP Gateway. The Static Gateway IP address is
set to 127.0.0.1 by default. In case of a router
enter its address here. Your LAN administrator
will provide the correct value for this field.
Dial Plan
Services
& Upgrade Examples
ENTRYPOINT ENTRYPOINT
USER GUIDE USER GUIDE
Contact
Information