Starting Up The Entrypoint - TANDBERG ENTRYPOINT Administrator's Manual

Starting Up the Entrypoint

Entrypoint Start-up
To start the Entrypoint, simply connect the
power cable, and set the power switch button
(both at the rear) to position I.
Power switch
On the front panel of the system the power
indicator LED, marked PWR, will turn GREEN.
Table of Trademarks & Patents &
Contents Copyright Disclaimers
D 14050.04
10.2007
You may access the
Entrypoint by entering the
IP-address of the Entrypoint
in a standard WEB-browser.
You will then be asked to
enter a password. You will
need to enter admin as
user name. The default
password for the Entrypoint
is TANDBERG. Remember
that the password is case
sensitive. Note that you may
also use SSH and Telnet to
configure the Entrypoint.

Reboot the Entrypoint.

Connect to the Entrypoint via the serial interface once it has
restarted.
 Login with User Name pwrec.
No password is required.
Safety/ To Get You Using the Using the
Environmental Up and Going Entrypoint Entrypoint
Accessing the Entrypoint
Forgot the Password?

You will be prompted for a new password.
The
Beyond that time, the system will have to be restarted to
change the password.
Viewing the Configuring Maintenance
System Status the Entrypoint
17
TANDBERG TANDBERG
USER NAME
PASSWORD. Default
password is
case sensitive)
pwrec account is active for one minute following a restart.
Dial Plan
Services
& Upgrade Examples
ENTRYPOINT ENTRYPOINT
USER GUIDE USER GUIDE
admin
is
TANDBERG
(NB!
Contact
Information