H.323 Gatekeeper Status - TANDBERG ENTRYPOINT Administrator's Manual

Tandberg user guide network device entrypoint
Table of Contents

Advertisement

H.323 Gatekeeper Status

About H.323 Status
H.323 Gatekeeper Status
shows the current status of
the Gatekeeper registration.
To view H.323 gatekeeper
status, as indicated in the
screenshot shown here,
select
H.323 Status
item of
the
Status
tab.
Note that, since this
target system is not
an endpoint it is not
possible to use its IP
address to place calls to or
through the Entrypoint!
Table of
Trademarks &
Patents &
Contents
Copyright
Disclaimers
D 14050.04
10.2007
Safety/
To Get You
Using the
Environmental
Up and Going
Entrypoint
Registration Status Registered
Registration Status Inactive
Registration Status Rejected
Viewing the
Viewing the
Configuring
Maintenance
System Status
System Status
the Entrypoint
25
TANDBERG
TANDBERG
Registration
Status. If Registered, the
Entrypoint is registered to the Gatekeeper with
below mentioned Address and Port.
IP Address.
Shows the IP address of the
Gatekeeper.
Port. Shows the destination port number on
the Gatekeeper.
In case the Entrypoint is in direct mode or
in case the gatekeeper IP address is filled
in incorrectly, the Entrypoint will not be
registered with the Gatekeeper, and the
Registration status is stated as Inactive.
Registration status will show
Gatekeeper unreachable; the Entrypoint's
H.323 stack returns this reject message in
case the gatekeeper is down.
Duplicate alias; a system with an identical
name has already been registered.
Authentication failure; Authentication
ID and/or Authentication Password are
incorrect.
Dial Plan
Services
& Upgrade
Examples
ENTRYPOINT
ENTRYPOINT
USER GUIDE
USER GUIDE
Rejected
when:
Contact
Information

Advertisement

Table of Contents
loading

Table of Contents