Table of Contents
Advertisement
ISDN/BRI Status (BRI Versions only)
Table of
Trademarks &
Patents &
Contents
Copyright
Disclaimers
D 14050.04
10.2007
Safety/
To Get You
Using the
Environmental
Up and Going
Entrypoint
Select
BRI hardware status indication
The screenshot shows the status page of a BRI version of the
Entrypoint. The BRI status displays the conditions of ISDN
layer 1 and 2 separately. Green indicates up and in sync. Red
indicates not in sync and indicate probably a disconnected
ISDN line.
Besides the indications on the webpage each ISDN BRI
interface located at the back-side of the Entrypoint has a green
and orange LED. The meanings of these LEDs are:
•
••
•
Viewing the
Viewing the
Configuring
Maintenance
System Status
System Status
the Entrypoint
24
TANDBERG
TANDBERG
ISDN/BRI Status
to access the
ISDN/BRI Status
Green: Layer 1 of the ISDN signalling is up.
Green and
Orange. This indicates that both layers 1 and 2
are up. In some countries the orange LED can blink on a
regular interval, or is turned on when there is an active call.
No LED's
illuminate. This indicates that there is no
connection or a wrongly wired connection.
In some countries layer 2 can be down when there is no
activity (ongoing connections).
However, layer 2 should become active once a call is
made or received.
In case the BRI Entrypoint is connected with less than 4
BRI lines, the BRI interfaces with the highest number(s)
should be left open. For example when only 2 ISDN lines
are used they should be connected with interface 1 and 2.
Dial Plan
Services
& Upgrade
Examples
ENTRYPOINT
ENTRYPOINT
USER GUIDE
USER GUIDE
pane.
Contact
Information
Advertisement
Table of Contents
