Remote Control Details - TANDBERG MXP User Manual

MXP Video endpoints
What's in this user guide?

Remote control details

Don't let the number of keys on the remote control
confuse you. The system is quite simple...
The upper part
of the remote
control is used to
handle the video
part of the call...
...while the lower
part of the remote
control resembles
very much the
keypad of a mobile
phone.
D14034.04—MAY 2008
Getting started Making calls
Use the Phone Book
to store and recall
video contacts for
easy placement of
Press the Call
calls.
key to place a
call.
Phone book usage
Turn your
Arrow keys are
microphone
used to navigate in
on and off.
the menus. Press
OK to show the
menu and to select
Adjust the
menu items.
volume.
Toggle between
full screen and
different display
layouts.
Takes you back one step in the menu system, i.e. to
leave a menu undoing any changes. Use the key to
delete characters in an input field. Press and hold the
Use the End
Call key to end
the current call.
Pressing this
key when not
in a call will put
the system in
Standby mode.
Take a snapshot,
but only during
a call.
Video meeting features Video conferencing features
Switch to a predefined
presentation source.
If the key is held down
for 1 second then the
Presentation video
sources menu will
appear.
Display your outgoing
video. Press again to
return.
key for 1 second to close the menu.
You may predefine camera positions to be used
during a call. Presets do not apply to systems
with fixed or manually moved cameras.
User Guide
Zoom the camera in
and out.
Press Touch tones
when you are in a
call and need to dial
extension numbers
etc. Press the OK
button to exit Touch
tones.
5