How To Upgrade 3610 Firmware; Upgrade 3610 Cpu Firmware - CipherLab 1662 User Manual

1662/1664 Barcode Scanner

HOW TO UPGRADE 3610 FIRMWARE

Connect 3610 t o t he USB port of PC aft er inst alling it s driver. Refer t o
3610 for t he t arget scanner t o connect t o 3610.
Not e: While upgrading 3610 firm ware, t he syst em aut om at ically uses t he VCOM_CDC
driver if t he current connect ion int erface is HI D. Make sure t he VCOM_CDC driver has
been inst alled on your com put er ( for firm ware 2.0 or lat er) .

UPGRADE 3610 CPU FIRMWARE

1) Read t he following barcodes in sequence for 3610 t o ent er t he download m ode. The
Com m unicat ion LED on 3610 will be flashing red t o indicat e it is ready for
downloading.
2) Run t he download ut ilit y " ProgLoad.exe" on your com put er.
Kernel Program
K3610_V* .shx
256
User Guide
Enter Setup
Download 3610
CPU Firmware




User Program
STD3610_V* .shx
For t he com m unicat ion set t ings, select " RS-
232" and t he correct COM port for USB
Virt ual COM int erface.
I gnore t he baud rat e set t ing.
For t he file opt ion, click [ Browse] t o select
t he t arget file for firm ware updat e.
Click [ OK] .
Enter Setup
3.1.1 Connect t o