Code Id; Select Pre-Defined Code Id - CipherLab 1662 User Manual

5.4 CODE ID

Up t o t wo charact ers for Code I D can be configured for each sym bology. To m ake t he
Code I D configurat ion easier, t he scanner provides five pre- defined Code I D set s t hat you
can select one and m ake necessary changes on it .
 ®
I f " Bluet oot h HI D" or " USB HI D" is configured for int erface,
will t hen becom e applicable. You m ay decide whet her or not t o apply Key St at us
when " Norm al Key" is select ed for Key Type.
Key Type
Scan Code Only 1 scan code value is allowed.
Norm al Key Up t o 2 charact er st rings are allowed.
Not e: " ] C1" is t he Code I D of GS1- 128 ( EAN- 128) barcodes; " ] e0" is t he default Code I D
of GS1 Dat aBar ( RSS) barcodes.

5.4.1 SELECT PRE-DEFINED CODE ID

Chapter 5
Key Status
N/ A

Add Shift

Add Left Ct rl

Add Left Alt

Add Right Ct rl

Add Right Alt
Refer t o Keyboard Wedge Table.
Apply Code ID Set 1
Apply Code ID Set 2
Apply Code ID Set 3
Apply Code ID Set 4
Apply Code ID Set 5
Update
Defining Output Format
Key Type and Key St at us
197