Mobile Phone/Display Mode; Serial Number Stamp; Separator Between Serial Number Stamp And Data - CipherLab 1662 User Manual

1662/1664 Barcode Scanner

1.19 MOBILE PHONE/DISPLAY MODE

By default t his m ode is disabled. There is a big im provem ent in reading barcodes
displayed on m obile phones and elect ronic displays when t his m ode is enabled.

1.20 SERIAL NUMBER STAMP

Decide whet her t o add t he device serial num ber in front of t he dat a t ransm it t ed.

1.20.1 SEPARATOR BETWEEN SERIAL NUMBER STAMP AND DATA

Scan t he barcode below t o specify t he separat or charact er bet ween device serial num ber
and t he accom panying dat a. By default , t he separact or is a com m a sym bol.
1) Read t he barcode above t o specify a separat or charact er.
2) Read t he " Hexadecim al
3) Read t he " Validat e" barcode t o com plet e t his set t ing.
56
User Guide
Add serial number in
separator character
Value" barcode on page 272 for t he desired charact er.
Enable
*Disable
front of data
*Disable
Specify the
Enter Setup