Table of Contents
Advertisement
transportation and Final Shutdown
Transportation: Preparing for Shipment
6-1 transportation:
Preparing for
Shipment
108
User Guide STP420D/STP420ES
Chapter 6
transportation and Final
Shutdown
In some circumstances, you might want to ship or transfer the STP420
to another place. Eventually, you might not need to use the instrument
any further. There are specific instructions for transporting and
disposing of the STP420 safely.
You must familiarise yourself with the instructions here, before you ship
the instrument.
p
aCkaGinG
You must ship the instrument in packaging materials that are the same
as the original packaging. Any damage caused by shipping with any
other, nonconforming, packaging is not covered by the manufacturer's
warranty.
Any repairs required as a result of using nonconforming packaging will
be fully charged to the sending party. Thermo Fisher Scientific reserves
the right not to carry out a repair, depending on the seriousness of the
damage.
To order original packaging materials, contact Thermo Fisher Scientific
or a local dealer authorized by Thermo Fisher Scientific.
B
iohazarD
Make sure you follow the precautions for biological hazards. These are
in the Safety Precautions section of this manual.
To prepare for shipment and to make sure the instrument functions
perfectly again after transportation:
1. Observe all the conditions for storage and transportation given in:
•
Section 2-1 Unpacking the STP420
•
Section 2-2 Selecting a Site for the STP420
•
Section 2-3 Transporting the STP420 to Its Site
2. Remove all tissue cassettes.
3. Carry out a cleaning cycle with empty baskets.
Thermo Fisher Scientific
Advertisement
Table of Contents
