Displaying The Welding Circuit Inductivity L; General; Displaying The Welding Circuit Inductivity; Laying The Hosepacks Correctly - Fronius TransSteel 4000 Pulse Operating Instructions Manual

Displaying the welding circuit Inductivity L

General

The way that the hosepack is arranged has a very significant effect on the welding circuit
inductivity and therefore affects the welding process. It is important to lay the hosepacks
correctly in order to obtain the best possible welding result.
Displaying the The setup parameter "L" is used to display the most recently calculated welding circuit in-
welding circuit in- ductivity. The welding circuit inductivity is adjusted when the welding circuit resistance is
ductivity measured. Detailed information in this regard can be found under the "Welding circuit re-
sistance" chapter.
1
2
The most recently calculated welding circuit inductivity L is shown on the right-hand digital
display.
L ... Welding circuit inductivity (in microhenrys)
Laying the Hose-
packs Correctly
98
Access the Setup menu 2nd level (2nd)
Select parameter "L"