Displaying Waveform - Test Equipment Depot CW240 User Manual

5.4

Displaying Waveform

One of the following three screens can be displayed:
U&I WAVEFORM
1 Making Settings
TOP
MENU
ENTER
General 1/2
General 2/2
Save 1/2
Save 2/2
Volt. Quality
ENTER
2 Wiring
After the above settings have been completed, carry out wiring, referring to
Chapter 4 in this manual.
5-18
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
U WAVEFORM
Displays SETUP.
Using right and left direction cursor key, display the
General 1/2 screen.
Set up necessary items on the screen.
For details, refer to Chapter 3 in this manual.
Next, using up and down direction cursor key, display the
General 2/2 screen.
Also set up necessary items on the screen.
For details, refer to Chapter 3 in this manual.
Using right and left direction cursor key, select Save 1/2 screen.
Next, using up and down direction cursor key, select
Save 2/2 screen.
Using the cursor key, select VOLT. QUALITY.
This completes the settings, and return to the Top Menu screen.
I WAVEFORM
Top Menu screen
IM CW240P-E