Test Equipment Depot CW240 User Manual page 44

1 2
F F
<Vertical axis>
• The display range of the vertical axis is determined on the basis of the
measurement range set.
• U ZOOM and I ZOOM allow you to change the magnification (scaling) of the
vertical axis.
1 → 2 → 5 → 10 → 20 → 1/3 → 1/2
<To switch a waveform screen>
Using up and down direction cursor key, switch the waveform screen.
U&I WAVEFORM
5-20
3 4 5
F F F
Changes the magnification of
the vertical axis of current.
Changes the magnification of
the vertical axis of voltage.
Changes the CH number to be displayed.
(The CH number differs depending on setting of wiring.)
U WAVEFORM I WAVEFORM
IM CW240P-E