Preparation For Measurements; Connecting A Power Supply - Test Equipment Depot CW240 User Manual

Chapter 2 Preparation for Measurements

2. Preparation for Measurements

2.1

Connecting a Power Supply

Connect the AC adapter.
Approx. 10 cm
AC adapter
<4> Connect
<3> Connect
As backup power supply during a power failure, one of the following batteries
can be used. Use it together with the AC adapter.
• Alkaline batteries (supplied)
• NiMH battery pack (optional)
For more details, refer to the CW240 User's Manual
Section 3.2, "Connecting a Power Supply"
IM CW240P-E
CW240 main unit
Attach the filter
to the cord.
<2> Connect
Clamp filter
A1193MN
<1> Check that the power switch
is turned OFF.
2-1