Test Equipment Depot CW240 User Manual page 28

Power Screen
1
F
ENTER
<Description of the Power screen>
P1 to P3 : active power
P : total active power
S1 to S3 : apparent power
S : total apparent power
PA1 to PA3 :phase angles
PA :average
(phase angle)
LOAD CHANGE
2
F
The load changes the F2 key is pressed.
(For measurement of multiple loads)
The item changes each time the F3 key is pressed:
3
F
For instantaneous value measurements, the AVE, MAX., and MIN. values
indicate the measured values of integration measurement conducted
immediately before that.
(If no integration measurement is made immediately before that,
symbol ----- appears.)
5-4
Press the F1 (DISPLAY CHANGE) key to display the Power screen.
Using the cursor key, select POWER (highlighted).
Press the ENTER key to confirm it. The Power screen appears.
Q1 to Q3 : reactive power
Q
1 2 3
F F F
PF1 to PF3 : power factors
PF
: total reactive power
4 5
F F
: average (power factor)
IM CW240P-E