Test Equipment Depot CW240 User Manual page 27

<Description of the List screen>
U1 to U3 : voltage rms values
Uave : average voltage
1
F
P : active power
Q : reactive power
S : apparent power
PF : power factor
LOAD CHANGE
2
F
The load changes the F2 key is pressed.
(For measurement of multiple loads)
The item changes each time the F3 key is pressed:
3
F
For instantaneous value measurements, the AVE, MAX., and MIN. values
indicate the measured values of integration measurement conducted
immediately before that.
(If no integration measurement is made immediately before that,
symbol ----- appears.)
∗
l4: 4 ch. current is displayed only when wiring are set to 1P3W3I and 3P4W4I.
IM CW240P-E
2 3 4 5
F F F F
I1 to I3 : current rms values
Iave : average current
*
I4: 4 ch. current
PA: phase angle
f: frequency
Analog input
(optional)
5-3