Test Equipment Depot CW240 User Manual page 43

3 Displaying Waveforms
TOP
MENU
ENTER
1
F
ENTER
For more details, refer to the CW240 User's Manual
Chapter 6, "Configuring Settings"
Subsection 6.5.4, "Waveform Data"
Chapter 7, "Making Measurements"
Section 7.7, "Displaying Waveform"
IM CW240P-E
Displays the Measure screen.
Press the F1 key (DISPLAY CHANGE) for window callup.
Using the cursor key, select WAVEFORM (highlighted).
Press the right direction cursor key to move to the Waveform window.
Using up and down direction cursor key to select one of VOLT. &
CURR., VOLTAGE and CURRENT .
Press the ENTER key to display the Waveform window.
The VOLT. & CURR. (U&I) screen is used as an example.
5-19