Test Equipment Depot CW240 User Manual page 33

< Save 2/2>
After settings of Save 1/2 has been completed, display the Save 2/2 screen
using up and down direction cursor key.
Set the items to be saved to ON. (OFF if not)
Use the cursor key to select items to be saved, and press the F1 key if the items
are set to ON, and the F2 key if set to OFF.
1 2
F F
<Exiting the Save 2/2 screen>
Press the ENTER key.
ENTER
The screen returns to the Top Menu screen.
NOTE
• Check SAVE-TIME. This can confirm how long the data can be saved in the PC
card currently installed in the PC. If the SAVE-TIME is shorter than the
measurement period, delete unnecessary files in the PC card or replace the
PC card with a new one having a larger capacity.
• The measured data thus set to ON are saved to the PC card for each interval
time. If you still have other data to be saved, set the items to ON.
IM CW240P-E
F1: ON
F2: OFF
F1 : ON
F2 : OFF
F1: CHANGE
3 4 5
F F F
5-9