European Union (Eu); Fcc - Siemens SIMATIC NET RUGGEDCOM RSG908C Installation Manual

•
•
6.1.3

European Union (EU)

This device is declared by Siemens Canada Ltd. to comply with essential
requirements and other relevant provisions of the following EU directives:
•
•
•
•
•
The device is marked with a CE marking and can be used throughout the European
community.
A copy of the CE Declaration of Conformity is available from Siemens Canada Ltd..
For contact information, refer to
6.1.4

FCC

This device has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment.
This device generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
RUGGEDCOM RSG908C
Installation Manual, 04/2022, C79000-G8976-1404-11
EN 60079-0:2012/A11:2013
Explosive Atmospheres – Part 0: Equipment – General Requirements
EN 60079-15:2010
Explosive Atmospheres – Part 15: Equipment Protection by Type of Protection "n"
EN 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements
EN 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
EN 60825-1
Safety of Laser Products – Equipment Classification and Requirements
EN 50581
Technical Documentation for the Assessment of Electrical and Electronic
Products with Respect to the Restriction of Hazardous Substances
CISPR 32/EN 55032
Electromagnetic compatibility of multimedia equipment – Emission requirements
"Contacting Siemens (Page
Certification
6.1.3 European Union (EU)
vii)".
33