Starting And Stopping The Heat Pump; Starting The Heat Pump; Shutting Down The Heat Pump; Maintenance - DeDietrich EASYLIFE ALEZIO S V200 User Manual

Fig.60
MW-6000865-02
Fig.61
MW-6000890-1
Tab.26
Parameter
CH Energy Consumed
AC005
Cool Energy consumed
AC007
5.10

Starting and stopping the heat pump

5.10.1

Starting the heat pump

5.10.2

Shutting down the heat pump

6

Maintenance

6.1

General

7748661 - v04 - 01022022
1. Press the button.
2. Select . User settings
3. Select Energy counter.
Description
Energy consumed for central heating
Energy consumed for cooling
The energy consumed since the last energy consumption meter
reset is displayed.
1. Switch on the outdoor unit and the indoor unit.
The heat pump will begin an automatic vent cycle (which lasts
approx. three minutes), run each time the power is switched on.
2. Check the hydraulic pressure in the installation indicated on the user
interface.
Important
Recommended hydraulic pressure between 1.5 and 2.0 bar.
The heat pump must be shut down in certain situations, for example
during any intervention on the equipment. In other situations, such as an
extended absence period, we recommend that the System holiday mode
operating mode is used in order to benefit from the heat pump anti-
blocking function and to protect the installation from frost.
To shut down the heat pump:
1. Switch off the power to the outdoor unit.
2. Switch off the power to the indoor unit.
An annual inspection with a leak-tightness check in accordance with
prevailing standards is obligatory.
Maintenance operations are important for the following reasons:
6 Maintenance
MIV-S V200 31