Personalising The Zones; Definition Of The Term "Zone; Changing The Name And Symbol For A Zone; Personalising The Activities - DeDietrich EASYLIFE ALEZIO S V200 User Manual

5.4

Personalising the zones

5.4.1

Definition of the term "zone"

Fig.16
1
5.4.2

Changing the name and symbol for a zone

Fig.17
MW-6000865-02
Fig.18
MW-6000877-1
5.5

Personalising the activities

5.5.1

Definition of the term "Activity"

Fig.19
°C
22
1
20
2
19
5
16
06:30 09:00
7748661 - v04 - 01022022
Term given to the different hydraulic circuits. It indicates several rooms
served by the same circuit.
Tab.19
Key
1
2
2
MW-1001145-2
The name and symbol for a zone are factory-set. If required, you can
personalise the name and symbol used for the zones in your installation.
1. Press the
2. Select
3. Select Zones settings.
4. Select the zone to be changed.
5. Select General to access the parameters.
6. Change the name and/or the symbol for the zone. Refer to the table
Activity: this term is used when programming time ranges. It refers to the
client's desired comfort level for different activities during the course of the
day. One set point temperature is associated to each activity. The last
activity of the day remains valid until the first activity of the following day.
Tab.20
Start of the activity
4
3
6:30
5
9:00
17:00
17:00 20:00 23:00
20:00
MW-1001144-2
23:00
Example:
Zone
Zone 1
Zone 2
button.
User settings.
provided at the back of the manual.
Example
Activity
Morning
Away
Home
Evening
Sleep
Factory-set name
Zone1
Zone2
Room temperature set­
point
20 °C
1
19 °C
2
20 °C
3
22 °C
4
16 °C
5
MIV-S V200
5 Operation
21