Monitoring The Energy Consumption; Starting And Stopping The Heat Pump; Starting The Heat Pump; Shutting Down The Heat Pump - DeDietrich ALEZIO O HYBRID User Manual

5.11

Monitoring the energy consumption

MW-6000865-02
MW-6000890-1
Tab.34
Parameter
CH Energy Consumed
DHW energy consumed
Cool Energy consumed
CH Energy delivered
DHW Energy delivered
Cool Energy deliver.
Total EnergyDeliver.
5.12

Starting and stopping the heat pump

7763552 - v02 - 29062020
7. Select Confirm to confirm the setting.
If your installation is equipped with an energy meter, you can monitor your
energy consumption.
1. Press the
2. Select
3. Select Energy counter.
Description
Energy consumed for central heating
Energy consumed for domestic hot water
Energy consumed for cooling
Thermal energy delivered for central heating
Thermal energy delivered for domestic hot water
Thermal energy delivered for cooling
Total thermal energy delivered
5.12.1
1. Switch on the outdoor unit and the indoor unit.
2. If an error message is displayed on the home screen, contact the
installer.
3. Check the hydraulic pressure in the installation indicated on the user
interface.
5.12.2
The heat pump must be shut down in certain situations, for example
during any intervention on the equipment. In other situations, such as an
extended absence period, we recommend that the System holiday mode
operating mode is used in order to benefit from the heat pump anti-
blocking function and to protect the installation from frost.
To shut down the heat pump:
1. Switch off the outdoor unit and the indoor unit.
key.
User settings.
The energy consumed since the last energy consumption meter
reset is displayed:

Starting the heat pump

The heat pump will begin an automatic vent programme (which lasts
approx. three minutes), run each time the power is switched on. If
there is a problem, an error message is displayed on the home
screen.
Important
Recommended hydraulic pressure between 1.5 and 2.0 bar.

Shutting down the heat pump

5 Operation
200 ESL HYBRID 39