Setting The Sound Of Movie - Olympus DP23-AOU Instructions Manual

A
B C
D
2

Setting the sound of movie

1
Connect the microphone purchased separately to the microphone
input connector A of DP2-AOU.
2
Check the [Movie recording] checkbox B .
3
Press the [Enable Sound Recording] button C to set it ON.
Button
ON The sound is included when recording
the movie.
OFF The sound is not included when
recording the movie.
4
Record the movie. For recording procedures, see p.39.
While recording the movie, the sound from the microphone is recorded
in the movie file.
Outputting the sound by DP2-AOU
To output the sound by DP2-AOU, connect the speaker purchased
separately to the lineout connector D . (For setting the sound
volume, refer to the instruction manual of the speaker.)
DP23-AOU/DP28-AOU
Function
47