A
B
18
2
Connecting the display cable
1
Connect the connector B of the display cable to the connector A
of DP2-AOU.
Use a HDMI cable applicable to the display as the display
TIP
cable.
When using a touch panel display
The USB cable for the touch panel must be connected in addition
to the display cable. For connection procedures, see "Connecting
USB devices (p.21)".
Depending on the display to be connected, it may be necessary to
install the dedicated device driver. For installation procedures, see
"Installing the dedicated device driver (p.90)".
If the display is connected via a display switcher,
NOTE
malfunction may be caused. Do not use a display
switcher.