Table of Contents
Advertisement
H
I
J
7
When the intermediate magnification changer is in the light path, if you want
to change the total magnification, select [Total magnification] H .
Check the [Use manual calibration] checkbox I , and set the total
magnification you want to change in J .
Pressing the [Default] button brings all the total magnifications
TIP
back to default values.
8
Press the [OK] button to close the [Manual Magnification Calibration]
dialog box.
9
Press the [Close] button to close the [Calibrations] dialog box.
If the microscope is equipped with the magnification changer,
TIP
input the magnification in [Magnification] of [Magnification
Changer], and press the [Add] button.
DP23-AOU/DP28-AOU
85
Advertisement
Table of Contents
