Control Window - Olympus DP23-AOU Instructions Manual

2-2 Control window

Setting the main switch of DP2-AOU to ON allows you to start the camera control software. The camera control software
is displayed in the upper right area of the display window. The [Acquisition] tab and the [Play] are are shown on the
control window.
Status when the button is pressed
There are buttons which change the setting status using the same button. The setting statuses are described below.
Button color
Blue
Gray
[Acquisition] tab
The [Acquisition] tab is used mainly for acquiring the images.
When acquiring the
still image (snapshot)*
[Movie recording] (p.39)
When recording the movie*
[Movie recording] (p.39)
*Use the [Movie recording] check box for switching between acquiring the still image and recording
12
the movie.
The settings displayed on the button are enabled or ON.
The settings displayed on the button are disabled or OFF.
[Live] (p.41)
[Live] (p.41)
Status
[Maximize to Screen] (p. 61)
[Turn Off System] (p. 24, 28)
[Snapshot] (p.26)
[System Settings] (p.55, 57, 83, 86)
[File Naming and Saving
Options] (p.32, 54)
[Maximize to Screen] (p. 61)
[Turn Off System] (p. 24, 28)
[Movie] (p.39)
[Enable Sound Recording] (p.47)
[System Settings] (p.55, 57, 83, 86)
[File Naming and Saving
Options] (p.32, 54)