Table of Contents
Advertisement
[Circle to Circle]
2 circles are created (by inputting 3 points) on the image, and you can measure the length between centers of 2 circles.
In the same way, the
circle is drawn from
the specified 3 point
positions.
A circle is drawn from
the specified 3 point
positions.
A line connecting the centers
of 2 circles is drawn and its
length is displayed.
[Linear Ruler]
You can draw the linear ruler on the image.
The linear ruler and its length
are drawn in the direction from
1 to 2
.
1
Press the
button.
2
Specify the start point of the position you want to measure using the
circle. Click the mouse to specify 3 points that will be the circumference.
3
In the same way as
, specify the end point of the position you want
2
to measure using the circle.
4
You can measure another position continuously. Right-click the mouse
on the screen to finish measurement.
1
Press the
button.
2
Click the mouse to specify the start point and the end point of the
position you want to draw.
3
You can draw another line ruler continuously. Right-click the mouse
on the screen to finish measurement.
DP23-AOU/DP28-AOU
75
Advertisement
Table of Contents
