Table of Contents
Advertisement
A
28
6
Locking and unlocking the exposure time
When the exposure mode [Auto] is selected
B
1
2
3
C
TIP
A
7
Showing or hiding the control window
1
8
A
Exiting the system
1
When observing the specimen where observation objects are scattered
in auto exposure mode, the exposure time may be increased or
decreased to allow the live image brighter or darker in association
with stage operation. In this case, lock the exposure time to observe
the specimen with the constant brightness.
Select the [Acquisition] tab A .
If the setting items of [Camera] are not displayed, press B to open
them.
Press the [Lock Current Exposure Time] button C to switch between
locking and unlocking the exposure time.
When the exposure time is locked, the metering region and
the ISO sensitivity cannot be changed and the exposure
cannot be compensated.
Operate with the A button.
Button
The control window is hidden.
The control window is shown again.
(Upper right area of the screen)
Operate with the A button.
Button
The system shuts down and the main switch of
DP2-AOU is turned OFF.
Function
Function
Advertisement
Table of Contents
