Table of Contents
Advertisement
Use the metal ejector levers to pull off the blank panel.
Install RTM ISDN Card on RealPresence Collaboration Server
As a first installation, the RTM ISDN card must be installed in the top slot of the RMX chassis. The RTM
ISDN card must be seated opposite to an MPMRx card located in the top slot on the front of the RMX.
Procedure
To install RTM ISDN Card on RealPresence Collaboration Server:
1. On the new RTM ISDN card, move the ejector levers to their fully open position.
2. Slide in the RTM ISDN card in the RealPresence Collaboration Server slot.
An RTM ISDN card must connect directly to an MPMRx card in the opposite-facing front slot.
Install RTM ISDN Card on RealPresence Collaboration Server 2000
3. Push the card into the slot until the ejector levers touch the front edge of the card cage.
4. Push the ejector levers to their fully closed position.
5. Tighten the captive screws on each side of the rear panel of the card, securing the RTM ISDN
card to the RealPresence Collaboration Server.
Mounting the RealPresence Collaboration Server (RMX) 2000/4000 in a
19" Rack
There are two methods for installing the RealPresence Collaboration Server 2000/4000 in a 19" rack:
•
Using the rack rail runners on the rack
◦
Install the telescopic rail runners.
◦
Mount the RealPresence Collaboration Server on top of the rail runners.
◦
Fasten the RealPresence Collaboration Server to the rack spacers using the flat head screw
(item 8) with flat washer
Collaboration Server front mounting brackets.
Polycom, Inc.
(item 9) through the two holes in the RealPresence
Appliance Edition Installation
20
Advertisement
Table of Contents
