Table of Contents
Advertisement
Install the RealPresence Collaboration Server (RMX) 2000 in a rack
Install the RealPresence Collaboration Server (RMX) 4000 in a rack
•
Using a shelf
◦
Install the shelf, supplied by the rack manufacturer, in the rack.
◦
Mount the Collaboration Server unit on the shelf.
◦
Fasten the RealPresence Collaboration Server to the rack with screws through the four holes
in the RealPresence Collaboration Server front mounting brackets.
Install the RealPresence Collaboration Server (RMX) 2000 on a shelf
Connect Cables to RMX 2000
Do not remove the protective caps from LAN1, LAN3 and ShMG ports when you connect the cables to
RMX 2000.
Connect the following cables to the back panel:
Polycom, Inc.
Appliance Edition Installation
21
Advertisement
Table of Contents
