Install The Telescopic Rail Runners On The Rack - Polycom RealPresence Collaboration Server Virtual Edition 1800 Getting Started Manual

Part/Kit no. Item
Rack spacer Rack spacer
assembly kit
Flat head screw - M5*10mm
Rail runner Flat head screw - M3*8mm
assembly kit
Flat washer M3
Nut spring M3
Collaboration Pan head screw - M5*12mm
Server chassis
assembly kit
Flat washer M5

Install the Telescopic Rail Runners on the Rack

Rack Rail Runners require a minimum of 48 cm and a maximum of 80cm within the rack for installation.
Procedure
To install the Telescopic rail runners on the rack:
1. Determine the location of the Collaboration Server on the rack:
• Allow for a 1U gap above and below the system for ventilation.
• Use the Rack Spacer (item no. 3) to predetermine its position on the rack post, making sure
that square studs of the spacer fit into the rack post's square/rounded mounting holes. Mark
the spacer's location on the rack post. Repeat this process for the 3 remaining vertical posts
ensuring that the system can be horizontally seated.
Polycom, Inc.
Item
no. Item Sample
3
Front & Rear
4
5
6
7
8
9
Appliance Edition Installation
Item
Quantity
4
8
4
4
4
2
2
15