Appliance Edition Installation; Prepare For System Installation; Ip Services - Polycom RealPresence Collaboration Server Virtual Edition 1800 Getting Started Manual

Appliance Edition Installation

Topics:
•

Prepare for System Installation

• Unpack RealPresence Collaboration Server (RMX) 1800/2000/4000
• Installing the RealPresence Collaboration Server (RMX) 1800
• Installing the RealPresence Collaboration Server (RMX) 2000
• Installing the RealPresence Collaboration Server (RMX) 4000
• First Entry Power-up and Configuration
If you purchased the Polycom RealPresence Collaboration Server, Appliance Edition, you need to install
the server. If the system software is not pre-installed on the server, you need to download the software
from the Polycom support site and create a DVD to install the software on your server.
Follow the process outlined in the following topics to install the Polycom RealPresence Collaboration
Server, Appliance Edition: Review the most recent Polycom RealPresence Collaboration Server
1800/2000/4000 Release Notes
Prepare for System Installation
Before you start, you must gather network addresses to be used for the configuration from your Network
administrator.

IP Services

The IP addresses and network parameters which enable communication among the RealPresence
Collaboration Server, its management application and the conferencing devices.
Completing the First Time Setup Worksheet
Before you begin install and system setup, fill out the My System Values column of this worksheet.
My
System
Item Values
Control
Unit IP
Address
Shelf
Managem
ent IP
Address
Polycom, Inc.
Factory-Set
Default Values
Description
192.168.1.254 Enables communication between the RealPresence Collaboration
Server and the RMX Web Client, and is used to manage the MCU.
DHCP is not supported for the Control Unit IP Address.
192.168.1.252 This is not applicable to RealPresence Collaboration Server 1800.
9